Decarbonise Your Heating & Reduce the Cost of Electrification
Warm people, not spaces.
Ultra energy-efficient heating for standing and stationary workers in large industrial and warehouse settings.
- Instantly reduce scope 2 emissions with 85%+ reductions in energy wastage
- Verification of Low Voltage Technology by University of Exeter's Green Futures Solutions
- No infrastructure changes or operational downtime required
- Plug & Play
- Same-Week Delivery
- 14-Day Money Back Guarantee
Trusted by Sustainability-Focused and B-Corp Companies
How it Works - Energy-Efficient Heating
(1) Plug It In
Position the Heat Mat on a flat floor & plug into standard UK sockets. No installation, no disruption.
(2) SET TEMPERATURE SETTING
The Heat Mat will reach up to 60°C temperature within 15-20 minutes of being powered on.
(3) STAND ON HEAT MAT
Operators standing on the Heat Mat will feel warm, comfortable & productive throughout the shift.
WarmTronics vs Other Electric Heaters
Real examples of KgCO2e savings, per annum, delivered for UK customers:
- Whistl: -2.8m
- Geodis: -130k
- James & James: -46k
Efficiently heat the person, not the vast air around them!
Low voltage heating:
- Reducing energy wastage by 85%+
- Helping companies to better achieve net zero targets
- Saving £££'s off winter heating bills
Warehouse Heating That’s Better for People, Planet, and Profits
206 Watts
Average Power
Draw
Per Hour
85%+
Energy Savings
vs. Alternatives
£0.51
Daily Running
Cost (8 hour shift)
< 6 Months
Typical Return
On Investment
See What Impact We Can Make
- We'll calculate your Energy & Carbon Savings
- We'll advise you on any questions that you might have about purchasing, or using WarmTronics.
- We'll contact you within 24 hours.
Winter Is Here
Instantly cut your heating bills & kgCO2e. Boost employee comfort & productivity during “winter peak”
Achieve Positive ROI within Months.
14-Day Money Back Guarantee
Try it on-site for a couple of weeks.
If your team isn’t warmer and your energy bills aren’t lower, we’ll refund you in full when the Heat Mat is safely returned.
Prefer to talk First?
Call us on +44 1924 682 582
'Clean Electric' Heating FAQs
Why is the Heated Anti-Fatigue Mat so energy efficient?
Our team of engineers have created a portable, energy-efficient heater that uses little electricity, warms the person and has a low amp rating so electrics don’t trip when they are all turned on simultaneously.
Power Input:
Alternative Current | Wattage | Frequency |
230-240 Volts | 240 Watts | 50/60 Hertz |
Power Output:
Alternative Current (AC) | Wattage | Frequency |
48 Volts | 400 Watts (Maximum)
| 50/60 Hertz |
Do you have a link to the University of Exeter findings on your low voltage technology?
Yes, you can read the findings here.
The cycling mechanism of the Heated Anti-Fatigue Mat keeps the rubber surface consistently warm whilst using energy efficiently. When the mat reaches its maximum temperature of 60°C, it switches into a cycle of heating and resting.
It heats from room temperature to 60°C in about 15-20 minutes using roughly 334 watts.
Once at 60°C, the mat alternates between a low-power phase – drawing about 13.5 watts for roughly one minute – and a high-power phase – drawing about 334 watts for around two minutes.
This smart cycling maintains a steady temperature with significantly reduced energy use, a feature independently verified by Green Futures Solutions (powered by the University of Exeter).
Is it possible to run our Heated Anti-Fatigue Mats via Solar energy?
Yes. With an average draw of just 206W per hour, our Heated Anti-Fatigue Mats are well suited to solar power. A 1.8kW solar output can comfortably power an 8-hour shift, even at 10°C ambient.
Where is the Heat Mat made?
Our Heated Anti-fatigue Mat product is designed and manufactured in the UK. We originally developed the flagship product in Leeds, with support from product and electronics design teams in North and East Yorkshire. We now manufacture 1000’s of units each year in Southampton. Keeping production in the UK gives us full control over quality, lead times, and the premium standard our customers expect.
Do you have customer references?
What energy & carbon savings have you achieved for customers who have switched to WarmTronics?
Whistl (Nationwide, x7 Warehouses):
- Cut heating bills: -£364,000 per winter
- Reduced carbon emissions: -2,828,200 KgCO2e per annum
- Positive RoI: 3 months
Geodis (Nationwide, x4 Warehouses):
- Cut heating bills: -£176,000 per winter
- Reduced carbon emissions: -130,495 KgCO2e per annum
- Positive RoI: 5 months
James & James Fulfilment (x1 Warehouse):
- Cut heating bills: -£59,305 per winter
- Reduced carbon emissions: -46,088 KgCO2e per annum
- Positive RoI: 4 months
How much would the "Heated" Anti-Fatigue Mat cost in electricity for a site running from 9am to 5pm?
£0.51 per day.
Note: The calculation assumes the “Heated” Anti-Fatigue Mat operates for 8 hours daily and the electricity rate is £0.30 per kWh. During the 8-hour operational period, we estimate that the electricity usage is 0.336 kWh for the initial half hour before the “Heated” Anti-Fatigue Mat reaches 60°C. Subsequently, the cycling mechanism triggers, and electricity usage drops to 0.206 kWh for the remaining seven and a half hours. Energy costs are therefore approximately £0.51 per day based on the following calculation: £0.30 * (0.336 * 0.5 + 0.206 * 7.5) = £0.51
How warm to they get in a cold factory or warehouse?
There are three heat settings. Low: 35-40°C, Medium: 44-50°C, and High: 55-60°C. Each Heated Anti-Fatigue Mat has its own control, meaning users can choose their own preferred temperature,
Will multiple mats turned on simultaneously trip the electrics?
Our Heated Anti-Fatigue Mats draw only ~1.37 Amps, which is significantly lower than other Portable Heaters often used in Warehouses (typically circa ~8 Amps). This significantly reduces the risk of tripping electrics, even when dozens or hundreds of units are turned on and used simultaneously in the warehouse.
Does it need professional installation?
No. The Heated Anti-Fatigue Mat is a “Plug & Play” portable solution that requires no professional installation. Users can easily set it up and begin using it immediately.
Can we trial it on our industrial site before committing?
Yes. Every WarmTronics customer is covered by a 14-day money-back guarantee on the first unit purchased. Allowing you to trial our Heated Anti-fatigue Mat in person and making sure it’s the right heating solution for you and your team.
For companies with larger-volume requirements, we can also arrange an on-site warehouse survey and in-person product demo.
Keep operatives warmer, for less
- About Us:
- Our Story
- Sustainability
- Product:
- Our Product
- Video on FAR Infrared Heating
- Product Sheet
- Instructions for Use
- Applications:
- Use Cases
- Success Stories:
- Customers
- Awards
- Commercials:
- Website Privacy Policy
- Website Terms of Use
- Enquiries:
- Contact Us
- Help:
- Help Centre
- FAQs
- Resources
- Partner Hub
- Support
Decarbonise Your Heating & Reduce the Cost of Electrification
Warm people, not vast spaces. Ultra energy-efficient heating for standing and stationary workers in large industrial and warehouse settings.
- Instantly reduce scope 2 emissions with 85%+ reductions in energy wastage
- Verification of Low Voltage Technology by University of Exeter's Green Futures Solutions
- No infrastructure changes or operational downtime required
Trusted by Sustainability-Focused and B-Corp Companies
Over 1,000 “Heated” Anti-fatigue Mats in operation nationwide across logistic, fulfilment and distribution centres.
How it Works
– Energy Efficient Heating
(1) Plug It In
Position the Heat Mat on a flat floor & plug into standard UK sockets. No installation, no disruption.
(2) SET TEMPERATURE SETTING
The Heat Mat will reach up to 60°C temperature within 15-20 minutes of being powered on.
(3) STAND ON HEAT MAT
Operators standing on the Heat Mat will feel warm, comfortable & productive throughout the shift.
WarmTronics vs Other Electric Heaters
Real examples of KgCO2e savings, per annum, delivered for UK customers:
- Whistl: -2.8m
- Geodis: -130k
- James & James: -46k
Efficiently heat the person, not the vast air around them!
Low voltage heating:
- Reducing energy wastage by 85%+
- Helping companies to better achieve net zero targets
- Saving £££'s off winter heating bills
Warehouse Heating That’s Better for People, Planet, and Profits
206 Watts
Average Power
Draw
Per Hour
85%+
Energy Savings
vs. Alternatives
£0.51
Daily Running
Cost (8 hour shift)
< 6 Months
Typical Return
On Investment
See What Impact We Can Make
- We'll calculate your Energy & Carbon Savings
- We'll advise you on any questions that you might have about purchasing, or using WarmTronics.
- We'll contact you within 24 hours.
Warehouse Heating FAQs
Why is the Heated Anti-Fatigue Mat so energy efficient?
Our team of engineers have created a portable, energy-efficient heater that uses little electricity, warms the person and has a low amp rating so electrics don’t trip when they are all turned on simultaneously.
Power Input:
- 230-240 Volts
- 240 Watts
- 50/60 Hertz
Power Output:
- 48 Volts
- 206 Watts (Average Wattage Per Hour on the Highest Temperature Setting)
- 50/60 Herz
Do you have a link to the University of Exeter findings on your low voltage technology?
Yes, you can read the findings here.
The cycling mechanism of the Heated Anti-Fatigue Mat keeps the rubber surface consistently warm whilst using energy efficiently. When the mat reaches its maximum temperature of 60°C, it switches into a cycle of heating and resting.
It heats from room temperature to 60°C in about 15-20 minutes using roughly 334 watts.
Once at 60°C, the mat alternates between a low-power phase – drawing about 13.5 watts for roughly one minute – and a high-power phase – drawing about 334 watts for around two minutes.
This smart cycling maintains a steady temperature with significantly reduced energy use, a feature independently verified by Green Futures Solutions (powered by the University of Exeter).
Is it possible to run our Heated Anti-Fatigue Mats via Solar energy?
Yes. With an average draw of just 206W per hour, our Heated Anti-Fatigue Mats are well suited to solar power. A 1.8kW solar output can comfortably power an 8-hour shift, even at 10°C ambient.
Where is the Heat Mat made?
Our Heated Anti-fatigue Mat product is designed and manufactured in the UK. We originally developed the flagship product in Leeds, with support from product and electronics design teams in North and East Yorkshire. We now manufacture 1000’s of units each year in Southampton. Keeping production in the UK gives us full control over quality, lead times, and the premium standard our customers expect.
Do you have customer references?
What energy & carbon savings have you achieved for customers who have switched to WarmTronics?
Whistl (Nationwide, x7 Warehouses):
- Cut heating bills: -£364,000 per winter
- Reduced carbon emissions: -2,828,200 KgCO2e per annum
- Positive RoI: 3 months
Geodis (Nationwide, x4 Warehouses):
- Cut heating bills: -£176,000 per winter
- Reduced carbon emissions: -130,495 KgCO2e per annum
- Positive RoI: 5 months
James & James Fulfilment (x1 Warehouse):
- Cut heating bills: -£59,305 per winter
- Reduced carbon emissions: -46,088 KgCO2e per annum
- Positive RoI: 4 months
How much would the "Heated" Anti-Fatigue Mat cost in electricity for a site running from 9am to 5pm?
£0.51 per day.
Note: The calculation assumes the “Heated” Anti-Fatigue Mat operates for 8 hours daily and the electricity rate is £0.30 per kWh. During the 8-hour operational period, we estimate that the electricity usage is 0.336 kWh for the initial half hour before the “Heated” Anti-Fatigue Mat reaches 60°C. Subsequently, the cycling mechanism triggers, and electricity usage drops to 0.206 kWh for the remaining seven and a half hours. Energy costs are therefore approximately £0.51 per day based on the following calculation: £0.30 * (0.336 * 0.5 + 0.206 * 7.5) = £0.51
How warm to they get in a cold factory or warehouse?
There are three heat settings. Low: 35-40°C, Medium: 44-50°C, and High: 55-60°C. Each Heated Anti-Fatigue Mat has its own control, meaning users can choose their own preferred temperature,
Will multiple mats turned on simultaneously trip the electrics?
Our Heated Anti-Fatigue Mats draw only ~1.37 Amps, which is significantly lower than other Portable Heaters often used in Warehouses (typically circa ~8 Amps). This significantly reduces the risk of tripping electrics, even when dozens or hundreds of units are turned on and used simultaneously in the warehouse.
Does it need professional installation?
No. The Heated Anti-Fatigue Mat is a “Plug & Play” portable solution that requires no professional installation. Users can easily set it up and begin using it immediately.
Can we trial it on our industrial site before committing?
Yes. Every WarmTronics customer is covered by a 14-day money-back guarantee on the first unit purchased. Allowing you to trial our Heated Anti-fatigue Mat in person and making sure it’s the right heating solution for you and your team.
For companies with larger-volume requirements, we can also arrange an on-site warehouse survey and in-person product demo.